How To Install Window Blinds In Destin

Many Destin residents opt for window blinds when they want more privacy and governance over sunlight in their interiors. They’re a practical and budget-friendly window treatment. They also require just a few steps to place for experienced DIYers. But, nothing is more convenient than hiring an expert window treatment installer. Here are the basics of putting up window blinds and when you ought to call the experts to complete it for you.

Measure And Mark Everything Accurately

Prior to beginning, determine if you should get outside-mount or inside-mount blinds. This crucial detail will tell you where to measure. Get measurements of the width, depth, and height on the inside of your frame for inside-mount options. When hanging outside-mount blinds, measure the width and height of your window, counting the trim, and then lengthen your measurements by three inches to make sure you get good coverage. Measure exactly–avoid rounding up or down. Ill-fitting blinds won’t operate satisfactorily.

Shop For Blinds

After you have your dimensions, you are ready to shop for blinds. You might already know what type of blinds you wish to have. Pick blinds that are as even with your measurements as possible. Off-the-shelf blinds might not fit exactly, either extending out too much or not getting to the end of the window entirely. Ensure you have equipment that allow you to install the blinds at the appropriate depth, as well. You should order specially made blinds for a perfect fit.

Install Your Blinds

Your blinds may have instructions. Use them to install your exact product. If you want a glimpse of how difficult it is to install window blinds in Destin, here are some general steps to provide a better idea.

 

Inside Mount Blinds

 

1. Put a bracket at the top of the window’s frame approximately an inch from the side. Ensure this positioning won’t obstruct the blind’s operating mechanisms. Indicate the bracket holes with a pencil.
2. Drill pilot holes in the proper spots.
3. Align the bracket with your pilot holes and fasten with screws.
4. Redo these initial three steps for the other bracket.
5. Place the end caps onto the top rail of your blinds. Position the headrail into the brackets.

Connect the tilt wand and test. Additionally, evaluate the pull cord.

Outside Mount Blinds

1. Decide if you’re attaching to the wall around the window or the trim. Hold the headrail in place and make sure the blind covers the bottom of the window.
2. Mark each end of the headrail.
3. Measure four inches from your headrail marks and mark here for the screws.
4. Drill pilot holes on your marks.
5. Line up the bracket holes with the pilot holes and fasten with screws at each end.
6. Position the headrail into the brackets.

Hook on the tilt wand and try out everything to ensure it works.

Opt For The Simplest Way To Install Blinds 

Just a reminder, you aren’t required to put up blinds on your own. The most effortless way to install window blinds in Destin is to seek out a professional window treatment installer. They will work with you every step of the way. They’ll help you select blinds that meet your needs and preferences, make accurate measurements for a made-to-order product, and install them for you. They do this every day, so they’ll complete your project quickly and precisely. They’ll be able to remedy any challenges without wasting hours searching for help on the Internet. A window treatment specialist will also provide better-quality blinds than box stores or online resellers.

Avoid The Hassle And Hire Sunburst Shutters To Install Your Window Blinds In Destin

Installing window blinds in Destin couldn’t be simpler when you consult with Sunburst Shutters Destin. We’ll help you select custom-made blinds that will match your windows exactly, and our expert installation team will put them up for you. All you must do is call 850-203-0419 or fill out the form below to request a no-cost in-home consultation.